Yobiiq EM4301 Smart Electricity Meter.

Benefits of the EM4301 Smart Electricity Meter.

The meter supports multi-rate recording and can measure active and reactive bi-directional power. The voltage, current, active power, reactive power, apparent power, power factor and phase angle, among others are also stored in the datalogger.

• Certified according to IEC 62053, EN61010 (Low Voltage Directive - LVD), EN61326 (EMC)
• Pseudo-random transmissions prevent on-air radio collisions in large installations.
• Configuration of 10 different uplink ports, with configurable interval and measurement parameters (10 parameters per port).
• Remote switching of integrated relay
• Digital input to read the status of the circuit breaker
• Failed packages can be acquired from the internal datalogger
• Timesynchronization over LoRaWAN network

Technical and Functional System Specifications

iQ Electricity EM2101

General System Parameters

Power Supply : Powered by Energy Meter or by external 24VDC 

Operating Temperature:  0°C to 60°C Relative Humidity 5% – 80% non condensing 

Ingress Protection IP30 

Size 140x140x20 

Weight 114g

Installation Wall Screw Mounting or 3M Tape Mounting

Radio / Wireless

Technology LoRaWAN 1.0.4 / BLE 

Device Class Class A or C 

Frequency EU 863-870MHz / 2.4GHz ISM on BLE  (other regions available upon request)

RF Power 14dBm / 0 dBm (BLE )

Antenna Internal Internal 

Supported LoRaWAN Features OTAA, ADR 

LoRaWAN Security LoRaWAN End-to-End encryption

Interfaces

Primary  Dutch Smart Meter Protocol V3.0 and above

Secondary  Signal throughput of Primary Port. 

Digital Input Opto-isolated Digital Inputs, 3-24VDC (pulse counter support)

Regulatory Compliance

Security IEC 60529-1 

CE 

• Low Voltage Directive (EU/2014/30)
• EMC Directive (EU/2014/35)
• Radio Equipment Directive (RED) (EU/2014/53)

Sensors

Temperature -10°C to 80°C (+/- 0.3°C)

Humidity 0-100% Rv (+/- 2%)